For the sake of safety and high-altitude operation, please specify the maintenance plan of the equipment according to the actual situation, and check it at least every six months or a year according to the following key tips.
1. Bolt connection line, bolt connection of anchor bolt, bolt connection of end cover with stopper. The bolt connection of the arm installation and the bolt connection of the drive device.
2. Fitting and wearing parts are tightly fitted and worn by pin connections on the hoist, trolley/load beam. Slow down and wear of trolley wheels, rollers and cantilever support movement. Generally use lithium or calcium grease once after 6 months. Inspection of electrical equipment, including wear of cable sliders, damage to flat cables, etc.
3. Wear of the stopper.
4. The inspection and maintenance of the electric hoist, the inspection and maintenance of the electric hoist should be carried out by designated personnel, and the electric hoist, chain and walking drive device should be inspected according to the corresponding regulations.
5. When it is found in the inspection that the damage exceeds the relevant specified value, the parts should be replaced.
More information please contact us for free!
1. Bolt connection line, bolt connection of anchor bolt, bolt connection of end cover with stopper. The bolt connection of the arm installation and the bolt connection of the drive device.
2. Fitting and wearing parts are tightly fitted and worn by pin connections on the hoist, trolley/load beam. Slow down and wear of trolley wheels, rollers and cantilever support movement. Generally use lithium or calcium grease once after 6 months. Inspection of electrical equipment, including wear of cable sliders, damage to flat cables, etc.
3. Wear of the stopper.
4. The inspection and maintenance of the electric hoist, the inspection and maintenance of the electric hoist should be carried out by designated personnel, and the electric hoist, chain and walking drive device should be inspected according to the corresponding regulations.
5. When it is found in the inspection that the damage exceeds the relevant specified value, the parts should be replaced.
More information please contact us for free!
