New Pendant Load Turning Device to Flip Workpiece

| New Pendant Load Turning Device to Flip Workpiece

Description:
New Pendant Load Turning Device to Flip Workpiece:Turnover machine is one of the most common lifting equipment on the market. It is widely used in many fields. It is mainly composed of beam, flip mech
Category:
Created:
2022-02-24 16:58
New Pendant Load Turning Device to Flip Workpiece
Product Description
Introduction of flip machine
Turnover machine is one of the most common lifting equipment on the market. It is widely used in many fields. It is mainly composed of beam, flip mechanism, flip spreader, center of gravity adjustment device and so on. When the workpiece is turned up, the workpiece is lifted and the drive wheel is slowly and evenly rotated. The rotating wheel drives the lifting belt or the chain by friction or card slot. The center of gravity of the workpiece is the center line. Is a more effective tool for effort. The turning machine is a new type of lifting equipment and lifting equipment, you can work around the clock, and can be a lot of reduced labor costs, improve work efficiency
Flip machine features
1. low noise, small vibration;
2. Carrying capacity, system pressure is small;
3. Lifting and turning smooth and safe;
4. High loading and unloading efficiency;
5. easy handling;
6. Stable operation, safe and reliable;
Model: KF-RVE electric type harness spacing can be electric
Dynamic adjustment
Load capacity: 1 ton -50 tons
Scope of supply: basic configuration for hanging crane hook crane, with control line, with flashlight (left
/ Right and emergency stop), 400V / 50Hz 3 phase power,
48V control voltage with CEE 5-hole socket.
KF-RVE electric type turning machine
Flip machine Product composition:
1.hanging beam
2.Suspension
3.Suspension bolts
4.rubber pad feet
5.Drive device
6.Drive wheel
7.Chain or harness
8.Adjust the motor
9.Adjust the screw
10.Control box
11.CEE five hole socket
12.Manual doors and control lines
13.Maximum drive wheel spacing
14.Minimum drive wheel spacing
Selection table: TM - Flip torque, TS - Flip speed, W - Weight (without harness / chain)